Micro Series Contacts – Higher Density Without Sacrificing Performance


VPC Product News Micro Power and Micro Coaxial Contacts * 9025TR-High I/O Mass InterConnect Solution * Patchcord Designer
Micro Power and Micro Coaxial Contacts
Virginia Panel Corporation (VPC) has released a new Micro Series of Power and Coaxial contacts for the Test and Measurement Industry. The Micro Series provides higher density per module position, saving valuable space and increasing the ability to expand in the future without sacrificing performance.	VPC offers 50 and 75 Ohm Micro Coaxial contacts, which can perform up to 3 GHz. The Micro Power contacts have a 10,000 cycle life and are rated to 22 Amps continuous when using 12 AWG wire. The Micro Series offers crimp style contacts which enable quicker assembly. The contacts have collars for stability, accuracy, and contact alignment within the module. Micro Series modules can accept 50 and 75 Ohm Micro Coaxial contacts with the ability to mix with Micro Power contacts. Learn more about Micro Power Learn more about Micro Coax
9025 TR – High I/O Mass InterConnect Solution
VPC has just developed the 9025 TR, a combination of the G12 and 9025 Mass InterConnect Solutions. The 9025 TR has over twice the I/O as the G12; outfitted with the same 20 inch platform to support your enclosure while engaging and disengaging. The front-mount ITA is user-friendly, allowing the enclosure or fixture to be fastened from the mating side. The 9025 TR uses all standard modules and contacts, includes a microswitch and is available with optional table legs and keyboard tray kit.
	The docking feature of the 9025 TR provides an easy way to guide a fixture into position prior to engagement. Runners along the platform provide a smooth-sliding action, able to support fixtures up to 180 pounds. The 9025 TR can accommodate vacuum or mechanical fixturing. VPC modules can be intermixed to establish flexible custom interfaces; ideal for functional and system testing applications. Learn more about 9025 TR
Patchcord Designer
You can create custom patchcords using the online web tool, the Patchcord Designer. With the Patchcord Designer, you can design patchcords with a wide range of VPC and industry standard contacts, wire types, and wire lengths depending on your application. The Patchcord Designer offers the following features: Custom patchcords can be configured in 3 easy steps Customer drawings are generated instantly Over 70 contacts including 3rd party vendor contacts Over 70 wires covering a range of thicknesses and colors New contacts and wires are added continually. Most recently, USB and RJ45 connectors have been added Use the Patchcord Designer
Visit the VPC Contact Page to contact your Regional Sales Representative.